GFive G550 Power SC6531E Infinity CM2SCR Flash File
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok!
Saved to : C:\Users\SHAHID\Desktop\FLASH_DUMP.bin
Done!
Elapsed: 00:01:10
Reconnect Power/Cable!
Operation : Read NVM [ v1.02 ]
Device Name:-- GFive
Mobile Model number:-- G550 Power (E301 V2.0)
CPU type:-- SPD6531E
Language:-- Multi
Credit:-- Free
Requirements For Flashing
I:- Download and install SPD USB Mobile driver
II:- Download and install Mobile supported box / Dongle setup like Infinity Cm2
How to Flash
- Download and install SPD USB Mobile drivers
- Download the Flash File From the Link and extract it
- Open supported box setup / Dongle.
- Select Correct Mobile CPU type From Setup and Choose flash file.
- Turn off the Mobile, remove the battery.
- Connect the Cellphone with USB data cable through Computer and insert the Mobile battery again.
- Press and hold Mobile Boot Key
- Click on flash & then wait for the complete flash
- Complete of Flash remove USB data cable and power on the device.
- Enjoy it has done.
Note: Please make a back up of your device before install or update Flashing File.
Boot Key:- GFive G550 Power (E301 V2.0) SC6531E boot key is Call + 1
DOWNLOAD
cilick here
No comments:
Write comments